Today is 5/6/2023 and I am just starting to put the rolling chassis back together but I came up short of the U-bolts I need so I'm also working on other things that need done. I always have several things going on at the same time; today I have a engine going back together, a transmission done and waiting, fuel injectors disassembled and cleaned (waiting for a injector “pop tester” to come) so I can check them before I install them.
I was able to get the springs on and the axles in place on the springs but now I’m waiting on some new nuts for the U-bolts. I fitted the springs first and was able to jockey the rear axle into place, but there wasn’t enough space to do the same on the front, so I had to drop the front of the front springs, then put the axle in place and then lift the springs back into place.
All of that done using the hoist and crane. It would have been impossible to do by myself otherwise.
No comments:
Post a Comment