Vent seals
I got some seals from a friend who had them specially made. The are much softer than the available originals or aftermarket ones. the should have fit much easier, however I found them to be too stretchy, and would over-stretch the area. They require a lot of playing with that is not possible once the adhesive is laid down. I first used 3M and later used E6000. It got quite messy and I even cleaned it all back off at one point and redid them. It remains to be seen if they will hold. I may redo them later on the flap side rather than the bulkhead side.
No comments:
Post a Comment